Starter settings by material
Starting points published by the machine makers for their own machines. Power % and speed only transfer to the same machine class and wattage. Always run a test grid on an offcut first.
60 W CO2 (Thunder Laser USA LightBurn library)
Machine class: 60 W glass-tube CO2, gantry. Source: Thunder Laser USA, 60 Watt Material Settings (PDF, LightBurn library).
| Material | Operation | Mode | Power % | Speed (mm/s) | Line interval (mm) |
|---|---|---|---|---|---|
| Clear acrylic | Frost engrave | Scan | 25 | 600 | 0.064 |
| Clear acrylic | 1/8 in cut | Cut | 60 | 15 | — |
| Bamboo | Brown engrave | Scan | 25 | 700 | 0.064 |
| Paper / cardstock | Cut | Cut | 40 | 60 | — |
| Powder-coated tumbler | Engrave | Scan | 35 | 400 | 0.051 |
| MDF | Engrave brown | Scan | 20 | 400 | 0.085 |
| MDF | 3 mm cut | Cut | 70 | 15 | — |
| Cherry hardwood | Engrave | Scan | 20 | 500 | 0.085 |
| Cherry hardwood | 1/8 in cut | Cut | 70 | 10 | — |
| Maple plywood | 1/8 in cut | Cut | 70 | 20 | — |
| Slate | White engraving | Scan | 20 | 500 | 0.064 |
| Granite | Engraving | Scan | 20 | 600 | 0.085 |
| Glass | Engraving | Scan | 20 | 600 | 0.051 |
| Anodized aluminum | White engrave | Scan | 20 | 600 | 0.085 |
| Leather (raw veg-tan) | Light tan engrave | Scan | 15 | 700 | 0.085 |
| Leather (raw veg-tan) | 5 oz cut | Cut | 70 | 20 | — |
| Rubber | Stamp engraving | Scan | 60 | 400 | 0.051 |
| Fabric | Cut | Cut | 40 | 80 | — |
40 W diode (Creality Falcon2 40W parameter guide)
Machine class: 40 W blue diode, gantry. Source: Creality, Falcon2 laser engraving & cutting parameter settings.
| Material | Operation | Mode | Power % | Speed (mm/min) |
|---|---|---|---|---|
| Basswood 2 mm | Engrave | Engrave | 25 | 6,000 |
| Walnut plywood 3 mm | Engrave | Engrave | 20 | 6,000 |
| Brown leather 0.65 mm | Engrave | Engrave | 12 | 6,000 |
| Black opaque glossy acrylic 3 mm | Engrave | Engrave | 26 | 4,000 |
| Anodized aluminum | Engrave | Engrave | 30 | 6,000 |
| Brushed stainless steel | Engrave (mark) | Engrave | 40 | 6,000 |
| White tile painted black | Engrave | Engrave | 28 | 4,000 |
| Basswood 3 mm | Cut, 1 pass | Cut | 100 | 850 |
| Basswood 5 mm | Cut, 1 pass | Cut | 100 | 700 |
| Basswood 10 mm | Cut, 1 pass | Cut | 100 | 300 |
| Walnut plywood 3 mm | Cut, 1 pass | Cut | 100 | 750 |
| Black acrylic 4.6 mm | Cut, 1 pass | Cut | 100 | 180 |
| Brown leather 0.65 mm | Cut, 1 pass | Cut | 70 | 4,000 |
| Kraft paper 0.2 mm | Cut, 1 pass | Cut | 40 | 4,000 |
Before you copy a number
- Run a power/speed test grid on an offcut of the exact sheet you bought.
- Tube age, lens condition, focus and air assist all move the result (Thunder's own caveat).
- Never laser PVC, vinyl or chrome-tanned leather; ventilate every job; never leave a job unattended.