Advertised watts vs real watts
A "40W" diode engraver can mean 40 W of light, 40 W of electricity, or a sum of chip ratings. We read how each maker states the number, and we add independent power-meter readings where a reviewer published one.
Why it matters
Optical power is the light that reaches the material. Electrical input includes driver losses, fans and motors, so it is always higher (Opt Lasers explainer). Independent tests of popular diode modules found most measured close to their optical claims, while older listings used electrical numbers (Hobby Laser Cutters). Spot size matters as much as watts for cutting quality.
Every machine, how its watts are stated
| Machine | Headline | How stated | Main laser (maker) | Independent | Electrical input |
|---|---|---|---|---|---|
| xTool P3 80W | 80 W | tube rating | 80 W co2 | — | 1,400 W |
| Atomstack A70 Max | 70 W | output (labelled)Output 70-77 W (35-39 W mode) | 70 W diode | — | — |
| Sculpfun S70 Max | 70 W | chip rating'twelve 6W semiconductor laser chips with a maximum chip laser power of up to 72W' - a rating of the diodes, not stated as optical output | 72 W diode | — | — |
| Monport Mega 70W | 70 W | tube rating | 70 W co2 | — | — |
| xTool F2 Ultra (60W MOPA + 40W diode) | 60 W | rated outputFootnote: 'maximum laser output power may vary by up to +15% from the rated value'. | 60 W mopa | — | 400 W |
| OMTech Pronto 35 60W | 60 W | tube rating'Rated Power: 60W' | 60 W co2 | — | — |
| Creality Falcon Falcon2 Pro 60W | 60 W | optical (labelled) | 60 W diode | — | 360 W |
| Thunder Laser Nova Plus 24 (60W RF) | 60 W | tube rating | 60 W co2 | — | — |
| xTool P2S 55W | 55 W | tube rating | 55 W co2 | — | 700 W |
| OMTech Polar Lite 55W | 55 W | tube rating | 55 W co2 | — | — |
| OMTech Polar S 55W | 55 W | output (labelled) | 55 W co2 | — | — |
| Two Trees TTS-55 Pro | 55 W | name number'55' = 5,500 mW laser power; overall (electrical) power 41 W | 5.5 W diode | — | 41 W |
| Glowforge Pro HD | 45 W | tube rating | 45 W co2 | — | — |
| Monport Reno45 45W | 45 W | tube rating'Rated Power 45W' | 45 W co2 | — | — |
| xTool S1 40W | 40 W | unlabelled | 40 W diode | above claim* | — |
| Glowforge Plus HD | 40 W | tube rating | 40 W co2 | — | — |
| Sculpfun SF-A9 40W | 40 W | unlabelled | 40 W diode | 41 W | — |
| Ortur H20 40W | 40 W | unlabelled | 40 W diode | — | — |
| Creality Falcon Falcon2 40W | 40 W | optical (labelled)Machine power 240 W max | 40 W diode | — | 240 W |
| Longer B1 40W | 40 W | unlabelledProduct URL says '44-48w output power'; the spec table says 40W | 40 W diode | — | — |
| Sculpfun S30 Ultra 33W | 33 W | optical (labelled) | 33 W diode | 34 W | — |
| OMTech Galvo 30W integrated fiber | 30 W | unlabelled | 30 W fiber | — | — |
| Gweike G2 Pro 30W fiber | 30 W | output (labelled) | 30 W fiber | — | — |
| Monport GM Pro 30W fiber | 30 W | unlabelled | 30 W fiber | — | — |
| Thunder Laser Bolt (30W RF) | 30 W | tube rating | 30 W co2 | — | — |
| Atomstack A24 Pro | 24 W | unlabelled | 24 W diode | — | — |
| Sculpfun E1 Pro (21W) | 21 W | unlabelled | 21 W diode | — | — |
| xTool F1 Ultra | 20 W | unlabelledSpec table lists '20W Fiber & 20W Diode'; the page does not say optical or electrical. | 20 W fiber | — | 275 W |
| xTool M2 20W | 20 W | unlabelled | 20 W diode | — | 200 W |
| OMTech Solis Duo 20W fiber + 20W diode | 20 W | unlabelled | 20 W fiber | — | 360 W |
| Sculpfun G20 20W fiber | 20 W | unlabelled | 20 W fiber | — | — |
| Ortur Laser Master 3 20W | 20 W | optical (labelled) | 20 W diode | — | — |
| Creality Falcon Falcon A1 Pro | 20 W | optical (labelled) | 20 W diode | — | — |
| Creality Falcon Falcon T1 (20W diode) | 20 W | unlabelled | 20 W diode | — | — |
| Longer Ray5 20W | 20 W | unlabelled | 20 W diode | — | — |
| Longer Nano Duo | 20 W | unlabelled | 20 W diode | — | — |
| Two Trees TS2 20W | 20 W | unlabelled | 20 W diode | — | — |
| Gweike G3 Basic (20W fiber + 20W diode) | 20 W | unlabelled | 20 W fiber | — | — |
| xTool F2 | 15 W | unlabelled | 15 W diode | — | 150 W |
| Atomstack Atelier 12W galvo | 12 W | output (labelled) | 12 W diode | — | — |
| LaserPecker LP4 | 10 W | unlabelled | 10 W diode | — | — |
| Glowforge Aura | 6 W | unlabelled | 6 W diode | — | — |
* Hobby Laser Cutters reported the xTool S1 40W held "well above" 40 W but its 50 W meter overheated, so there is no stable number. Independent readings are a single sample on one unit; meters and methods vary.
How to read a spec sheet
- Look for "optical power" or "laser output power", not "machine power", "input power" or a number in the model name.
- For CO2, a tube's watt rating is a nominal figure; owners' meter readings vary a lot by tube age and setup.
- For galvo fiber machines, the number is the fiber source's rated average output.